Hikmicro B Series 사용자 설명서 - 페이지 13
{카테고리_이름} Hikmicro B Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hikmicro B Series 20 페이지. Handheld
페이지 인쇄
4.4
In target enhancement function, when the
target's temperature is higher than the set value,
the target will become red.
Steps:
1
In the live view interface, press
show the menu.
2
Press
3
Switch the palette mode to Above Alarm.
4
Set the temperature. When the
temperature of target is higher than the
set value, the target will be red in live
view.
5
Press
4.5
Set the alarm rules and the device will alarm
when the temperature triggers the rule.
Steps:
1
In the live view interface, press
show the menu.
2
Press
3
Press
you can select flashing alarm or audible
alarm as required.
The white light will turn off automatically
after enabling flashing alarm.
4
Select the alarm rule and set the alarm
and pre-alarm temperature. When the
target's temperature is higher or lower
than the threshold value, the device will
output alarm.
5
Press
5
Capture Snapshots
Steps:
1.
2.
Note
You cannot capture when the device is
connected with PC.
Enhance High-Temperature Target
/
Set Temperature Alarm
/
Note
In the live view interface, pull the trigger
to capture snapshot. The live view
freezes and device displays the snapshot
with temperature information.
Press
and press
, and select Palettes.
to save and exit.
, and select Alarm.
to enable the function, and
to save and exit.
button to save the picture,
button to cancel it.
6
to
to