AFL FlexScan FS200 OTDR 빠른 참조 매뉴얼 - 페이지 4
{카테고리_이름} AFL FlexScan FS200 OTDR에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AFL FlexScan FS200 OTDR 13 페이지. With smartauto, flexpress and linkmap
페이지 인쇄
OTDR Modes: SmartAuto
While in the SmartAuto OTDR Settings Menu:
Touch the desired setting field/tab (e.g.
•
sub-menu (where applicable).
Touch
to navigate to next/previous screen.
A
•
Touch
to return to the previous menu.
B
•
Touch Use Defaults
•
Touch 'Press to start'
•
SmartAuto OTDR Settings Summary
1. Test Type: Limited to Characterize in FS200-50B/100.
1
Select Characterize or FleXpress
when Network Type = Point-to-Point.
2. Pass/Fail Rule: Indicates selected LinkMap event pass/fail rules.
2
Touch to select ITU G.671, TIA-568.3-D or User. Touch and hold to
view/edit pass/fail event thresholds.
3. Network Type: Limited to Point-to-Point in FS200-50B/100 models.
3
Select Point-to-Point or FTTH PON in FS200-60/300/304 models. If PON selected, configure split ratio
settings to match expected network splitter configuration.
4. Fiber Type: Touch to select G.65x or User fiber type. Touch and hold to view/edit associated Group Index of
4
Refraction (GIR) and Backscatter Coefficient (BC) settings.
5. Launch Cord: Touch to configure length of Launch cable, if present.
5
6. Tail Cord: Touch to configure length of Receive cable, if present.
6
7. Launch Quality Check: Enable to check OTDR connection to launch cord or jumper cable at start of test.
7
Test Type) to display a
1
(if displayed) to reset settings to defaults.
C
to initiate testing.
D
Fast Test in FS200-60/300/304
™
with LinkMap
™
4
Display Summary
®
1
2
3
4
C
5
6
7
D
B
A