Hikmicro B1L 사용자 설명서 - 페이지 14
{카테고리_이름} Hikmicro B1L에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hikmicro B1L 17 페이지. Handheld thermography camera
페이지 인쇄
7
Image Settings
Steps:
1.
2.
3.
4.
5.
Note
Certain models support the Image Setting
function. Please refer to the actual device.
8
Set LED Light
In the live view interface, press
to White Light to enable or disable the LED
light.
Note
Certain models support the White Light. Please
refer to the actual device or datasheet.
9
Cast Screen
Before You Start
● Connect the device and PC with supplied
Type-C cable
● Install HIKMICRO Analyzer that supports
UVC protocol on your PC.
Steps:
1
In the live view interface, press
show the menu.
2
Press
Screen.
In the live view interface, press
show the menu.
Press
Press
Mode, and select the preview mode
needed.
Thermal: Display the thermal image
only.
Fusion: Fuse the optical image with
the thermal image. The fused image
with clear edge is displayed in this
mode.
Picture in Picture: Display a part of
the thermal image on the optical
image.
Optical: Display the optical image
only.
Optional: When selecting the fusion
mode, you need to select the Fusion
Level according to the target distance.
Press
/,
/
, and select Image.
, go to Image -> Preview
to save and exit.
and enable Cast
8
to
, and go
to