Hikmicro B20 사용자 설명서 - 페이지 11
{카테고리_이름} Hikmicro B20에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hikmicro B20 17 페이지. Handheld thermography camera
페이지 인쇄
1)
2)
3)
5
The device shows the real-time
temperature on the upper left side of live
view interface.
4.4
In target enhancement function, when the
target's temperature is higher than the set value,
the target's color will change to red
Steps:
1
In the live view interface, press
show the menu.
2
Press
3
Switch the palette mode to Above Alarm.
4
Set the temperature. When the
temperature of target is higher than the
set value, the target will be red in live
view.
5
Press
4.5
Set the alarm rules and the device will alarm
when the temperature triggers the rule.
Steps:
1
In the live view interface, press
show the menu.
2
Press
3
Press
you can select flashing alarm or audible
alarm as required.
The white light will turn off automatically
after enabling flashing alarm.
4
Select the alarm rule and set the alarm
and pre-alarm temperature. When the
target's temperature is higher or lower
than the threshold value, the device will
output alarm.
5
Press
5
Capture Snapshots
Steps:
1.
Go to Custom Spot. Select the
certain custom spot, and press
.
Press
adjust the position of the spot.
Press the trigger to finish setting.
Enhance High-Temperature Target
/
Set Temperature Alarm
/
Note
In the live view interface, press
show the menu.
/
, and select Palettes.
to save and exit.
, and select Alarm.
to enable the function, and
to save and exit.
5
/
/
to
to
to
to