AFL VS300 Series 빠른 참조 매뉴얼 - 페이지 6
{카테고리_이름} AFL VS300 Series에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AFL VS300 Series 8 페이지.
페이지 인쇄Centering Images/Panning Ferrule
If the fiber-end image is not centered in the display, the adapter cap and
adapter cap mount may be moved by hand to correct the problem.
1.
Loosen the locking ring.
2.
Apply left/right or front/back pressure on the adapter cap and the fiber-
end image will move accordingly on the display (motion will be reversed
when viewed on an external monitor).
3.
When centering a fiber-end image or viewing ferrule is complete, tighten
the locking ring.
Note: The VS 300 is a complex imaging system. Occasionally, an image
may not appear after the instrument is powered up. To correct this problem,
remove and reinstall the batteries.
Focus knob
6
Adapter cap
Locking ring