Adesso NuScan 7300CR 사용자 설명서 - 페이지 5
{카테고리_이름} Adesso NuScan 7300CR에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Adesso NuScan 7300CR 14 페이지.
페이지 인쇄Paired with Android /IOS Devices
1.please comfirm the scanner is in paring mode ,otherwise ,the device can't
search the scanner
2.Click the searched bluetooth device directly ,it
automatically
charging
please connect the RJ45 interface of the charging cable to the bottonm of
the scanner and the USB interface to the computer .Or, connect the 5V 500mA
power adapter to the power socket ,Charging time will be 2-3 hours ,After fully
charged ,the scanner can work 8-12 hours continuously
Reading angle
1.Maintain a bevel between the scanner and the barcode to make a best reading ;
2.do not keep the scanner in 90with the barcode ,otherwise the scanner can't read
3.the scanner must aim at the barcode and the beam must cover the whole barcode ,if don't
,Error maybe occur
Correctwayofreading
Incorrectwayofreading
Notice :
1.The wireless barcode scanner has been set well before delivery ,it can be used directly .
Please do not scan the barcode in the manual randomly to test. In case, the scanner cannot
work in normal condition after scanning the setting barcodes . Please scan the 'initialization
setting 'barcode then scan the 'serial mode'barcode. And the Baud rate should be 57600bps.
2.the wireless adapter should be connected to the fixed computer USB interface ,Do not plug in
or pull out the adapter frequently in order to help improving the working efficiency and avoid
man-made damage
Reset factory default
If need to reset the factory default , please scan the following three barcode in turn.
initialization setting
Serial mode
can finish the pairing
Correctwayofreading
Incorrectwayofraeding
4
LED Indicator & Beeper
Indicator Light Color
Instruction
Green light and will
Reading successfully and comes a short beep
be off soon
Red light always on
Charging (red light will be off when fully charged)
Press the button for 10 seconds. The blue light blinks and
Blue light blinking
scanner enters into pairing mode. After pairing successfully,
(Bluetooth)
thebluelightisonalways.
Beep Sound
Instruction
A short beep
Reading successfully
A long beep
Auto shutdown and enter into sleep mode
Two short beep
Power on
Three short beep
Fail to upload data. Please pair again
Low power, please charge.
Three long beep
Scanning Mode Setup
Setup Instruction：
1. Normal mode means real-time transmission. Scan 'Normal Mode' bar code,
the scanner will be in real-time transmission.
2. In inventory mode, the scanner will save the bar code it reads. When need to
upload the data to computer, scan 'Data Upload' bar code.
3. Scan 'Total Number of Data' bar code, the computer will show how many bar
codes the scanner reads under inventory mode.
4. Scan 'clear data' bar code means clear all the bar codes being read under
inventory mode.
Normal Mode
Inventory Mode
Upload Data
Clear Data
Non-volatile Mode
Total Number of Data
5