CORBERO FC 1801 I 지침 책자 - 페이지 4

{카테고리_이름} CORBERO FC 1801 I에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. CORBERO FC 1801 I 10 페이지.

페이지 인쇄

Instructions for totally built-in

appliances

Door reversibility (Fig. 1,a,b,c,)

The appliance is supplied with the right

door opening. To change the opening

direction of the door proceed as in the

following instructions before installing it.

1. Unscrew the upper pin and remove the spacer

2. Remove the upper door

3. Unscrew the pins (B) and the spacers (C) and

refit them on the middle hinge of the opposite

side. Snap the hinge cover (A).

4. Refit the upper door, the upper pin and the

spacer on the opposite side

5. Unscrew the lower pin and remove the spacer

and refit them on the opposite side.

Instructions for totally built-in

appliances

Dimensions of the recess

Height

1780 mm

Depth

Width

The appliance's door has been locked in

position for transport by means of pins on

both sides. According to the door opening

direction, remove relevant pins at the top

and at the bottom.

For safety reasons, minimum ventilation must

be as shown in Fig. 2

Attention: keep ventilation openings clear of

obstruction.

Push appliance into the housing until stop strip

(A) touches the kitchen unit.

550 mm

560 mm

min.

50 mm

200 cm

D567

D023

Fig. 1a

Fig. 1b

Fig. 1c

Fig. 2

min.

200 cm

Fig. 3