Dynojet Power commander V 설치 지침 - 페이지 4

{카테고리_이름} Dynojet Power commander V에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet Power commander V 4 페이지. 2017-2018 polaris scrambler 1000, 2017-2018 polaris sportsman 1000
Dynojet Power commander V에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (9 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (5 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 (5 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (8 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (8 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (4 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (5 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (5 페이지), 설치 매뉴얼 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 및 사용 설명서 (8 페이지), 설치 지침 및 사용 설명서 (6 페이지), 설치 매뉴얼 (4 페이지), 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (5 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (8 페이지), 설치 매뉴얼 (5 페이지), 설치 매뉴얼 (9 페이지), 설치 매뉴얼 (4 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 (5 페이지), 설치 지침 (7 페이지), 설치 지침 (4 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 (5 페이지), 설치 지침 (4 페이지), 설치 지침 (4 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 (5 페이지), 설치 지침 (5 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 (4 페이지), 설치 매뉴얼 (6 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 (5 페이지), 설치 매뉴얼 (6 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (6 페이지)

Dynojet Power commander V 설치 지침
FIG.D
FIG.E
20-010
www.powercommander.com
7
Locate the Throttle Position Sensor which is located
on the left hand side of the throttle bodies. Unplug this
connector to gain access to the wires.
8
Attach the supplied wire tap to the PINK wire with a
BLACK stripe (Fig.D).
This connection can be done further up the harness
than what is shown in Figure D for a cleaner install.
9
Plug the GREY wire from the PCV into the wire tap
(Fig.D).
It is recommended to use dielectric grease on these connections
10
Plug the TPS connector back onto the throttle body.
11
Attach the ground wire from the PCV to the negative side of the batter (Fig. E).
12
Reinstall the fuel tank making sure the PCV harness does not get pinched.
13
Secure the PCV in the tail section using the supplied velcro. Make sure to
clean both surfaces with the alcohol swab before attaching.
14
Locate the stock O2 sensor under the left hand side cover. Unplug the sensor
from stock wiring harness and connect the Dynojet O2 eliminator.
The stock O2 sensor does not need to be connected to anything.
2009 Suzuki Bandit 1250 PCV - 4