CORBERO FE 850 S/2 사용 설명서 - 페이지 11

{카테고리_이름} CORBERO FE 850 S/2에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CORBERO FE 850 S/2 14 페이지.

Should the setting-up place or handling demand it,

door-opening direction can be refitted from right-

handed to left-handed.

Following operations are to be done on the basis of

figures and explanations:

Pull out the plug from the mains socket.

Tilt back the appliance carefully being careful so

that the compressor can not touch the floor. It is

recommended to ask another person for help, who

can keep the appliance at this position safely.

Unscrew the adjustable feet situated on both sides

(2 pieces), in addition the screws fixing the lower

door holders (3 pieces) respectively the screw on

the other side.

Put over the pin in the lower door holding plate in

the direction of the arrow.

Fix the plate on the other side leaving the position

of the door unchanged.

Then screw in the one screw in the place set free

on the other side as well as the adjustable feet

(2 pieces) and set up the box.

For refitting the upper door holder take out the

screws (2 pieces) fixing the plastic top on the back

of the box.

Push back the top and lift it from the fixing

elements.

Unscrew the screws fixing the upper door holder

(2 pieces).

After unscrewing turn over the pin in the door

holder plate in the direction of the arrow.

Fit and fix the door holder plate on the other side

without displacing the door.

Put back the plastic top on the fixing elements and

pull it forward.

Fix the top with the screws (2 pieces) on the back

side of the box.

Put over the handle and the plastic nails on the

other side.

Put the appliance to its place, set it level and plug it

into the mains socket.

In case you do not want to perform the procedures

above, call the nearest brand-mark service.

Technicians will accomplish the refitting expertly for

charge.