Dynojet Power Vision 설치 매뉴얼 - 페이지 2

{카테고리_이름} Dynojet Power Vision에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet Power Vision 8 페이지. For 2019-2022 can-am ryker 600/900
Dynojet Power Vision에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지), 설치 매뉴얼 (6 페이지), 설치 매뉴얼 (7 페이지), 매뉴얼 (7 페이지), 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (7 페이지)

페이지 인쇄

INTRODUCTION

RETURN

SCROLL

ENTER

HOME/LOG

SCROLL

POWER VISION OVERVIEW—FRONT VIEW

USB CABLE PORT

CONNECT TO COMPUTER

POWER VISION OVERVIEW—SIDE VIEW

INSTALLING THE POWER VISION

INSTALL POWER VISION

DIAGNOSTIC PORT— TWO SEAT

2 HONDA TALON

DIAGNOSTICS CABLE PORT

CONNECT TO VEHICLE

DIAGNOSTIC PORT—FOUR SEAT

Thank you for purchasing the Power Vision from Dynojet

Research. The Power Vision is the device to interface

between your computer and vehicle ECU allowing you

to tune your stock ECU to achieve optimal performance

from your vehicle.

Use the buttons to navigate the device menus, make

selections, cycle through the four available gauge

screens, and log data. Connect to the diagnostic port

to ﬂ ash a tune; use the USB connection to interface

between the Power Vision and your computer.

For state of the art technical support, please visit

www.dynojet.zendesk.com.

Secure the Power Vision to the vehicle using the supplied

Velcro. Make sure the Power Vision will not interfere with

the operation and steering of the vehicle.

Note: The Power Vision does not need to be mounted

to the vehicle.

Attach the diagnostic cable to the diagnostic port on the

Power Vision and to the diagnostic port on the vehicle.

Talon Four Seat Models: located under the driver's seat.

Talon Two Seat Models: located under the driver's seat,

under a rubber ﬂ ap cover.

INSTALLATION GUIDE