Dynojet POWER VISION PV3-25-04 설치 매뉴얼 - 페이지 4
{카테고리_이름} Dynojet POWER VISION PV3-25-04에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet POWER VISION PV3-25-04 8 페이지. 2018-2021 can-am maverick trail 800, 2018-2021 can-am maverick trail 1000, 2019-2021 can-am maverick sport 1000
Dynojet POWER VISION PV3-25-04에 대해서도 마찬가지입니다: 설치 매뉴얼 (7 페이지)
페이지 인쇄
VIEWING THE VEHICLE INFORMATION
This menu allows you to view the device status (paired/not
paired), VIN #, Model ID, ECU serial number, tune compat, and
checksum compat.
Select Vehicle Tools>Vehicle Information.
VIEWING THE DIAGNOSTIC CODES
This menu allows you to read and clear diagnostic trouble
codes.
1
To read codes, select Vehicle Tools>Diagnostics>Active
Codes.
2
To clear codes, select Vehicle Tools>Diagnostics>Clear
Codes.
RESTORING THE ECU
This menu allows you to restore the ECU. Use Restore ECU if
the device does not complete the fl ash or if your vehicle will
not start.
Select Vehicle Tools>Restore ECU.
CONFIGURING GAUGES
Make your Power Vision device yours; display the channels
you want to see with four user-customizable full-color gauge
screens. Each gauge screen has four confi gurable channels.
Monitor channels such as Wideband, AFR, Boost, and integrated
belt temperature sensor. Sample gauges shown here; for
a complete list of monitors available, open the tune fi le in
Power Core or scroll through the gauges on the device when
confi guring or selecting channels for the list of options.
1
From the Main Menu, select Device Tools > Confi gure Gauges.
2
Select a gauge screen and press Enter.
3
Select a channel and press Enter.
4
Select a channel from the list and press Enter.
5
Select the precision or units for that channel and press Enter.
6
Continue setting up the remaining channels as desired.
7
Continue confi guring the remaining gauge screens as desired.
4 CAN-AM TRAIL INSTALLATION GUIDE
VEHICLE INFO
PAIRED VEHICLE: DEVICE NOT PAIRED
VIN: 3JBVGAWZ4HK000560
MODEL ID: 666939
TUNE COMPAT:
7E5163NF8VBS1
CSUM COMPAT:
98200115