Gama Garden GT-35 사용 설명서 - 페이지 9
{카테고리_이름} Gama Garden GT-35에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gama Garden GT-35 14 페이지. Petrol powered cultivator
페이지 인쇄2. Work performance on slopes
Danger: Injury may occur as a result of the
cultivator's turning over.
Apply special care during the change of direction. The
cultivator can be moved transversely on a slope. Do not
move the operating cultivator up and down the slope.
IT IS STRICTLY
CULTIVATOR ON A SLOPE EXCEEDING 20%.
Transportation
The cultivator may be transported by any means of transport
which can ensure cultivator integrity.
1. Transportation in short distances
For transporting the cultivator from an area to be cultivated to
another, use the wheels found on the plough iron.
1.
Insert the plough iron in the bracket in such a way that
the wheels are down.
Note: Setting the plough iron in transportation position is
done in reverse order. See the section "Setting the plough
iron".
2.
Press the handlebar down in such a way that the blades
do not touch the soil.
3. Relocate the cultivator carefully.
2. Transportation in longer distances
Warning!
Do not carry the cultivator when turned over or turned on its
side. Stand the cultivator on the blades and the wheels.
Risk of injury!
Periodical maintenance:
List of operations to be performed
Clean the guard and the blades
Clean the air filter (**)
Change the air filter
Change the oil in the engine case (*, **)
Perform lubrication of blade-reducer shaft
Check and clean the spark plug (***)
Change the spark plug
Clean the engine
Adjust the clutch cable
Change the blades
Change the cover of the fuel tank
Change the exhaust silencer
Check the tightness of threaded connections.
Tighten them if necessary.
(*) The first oil change in the engine must be done after two hours following the first work performance.
(**) If the engine works with higher load or under contaminated circumstances, the maintenance should be done more frequently.
(***) The spark plug electrodes must not be scraped or polished with sand.
FORBIDDEN
TO USE THE
After each
Stop the engine.
Remove the cap of the high-voltage cable from the
spark plug.
Wait for the engine to cool down entirely.
In case of transportation in a truck or a trailer, fix the
cultivator in order to avoid injuries.
Technical maintenance
For maintaining high level technical characteristics of
cultivator,
perform
Periodical maintenance will help increase engine life and
ensure trouble-free operation.
From the maintenance operations defined in hours or
calendar periods, perform the one which becomes due
earlier. In case of work performance under unfavourable
circumstances, carry out the maintenance more frequently.
Prior to the maintenance of the cultivator:
Risk of injury!
Stop the engine.
Remove the cap of the high-voltage cable from the
spark plug.
Wait for the engine to cool down entirely.
Before each use:
Check the oil level in the engine case. Fill up the oil until
the proper level is reached, if necessary.
Check the threaded connections for safe tightness.
Tighten them if necessary.
After each 5 hours' use:
Check the oil level in the engine case.
Once in each season:
It is recommended to perform service of cultivator in a
specialized service repair shop.
use
Each 25
hour
periodical
maintenance
Once in a
Each 50
season or
hours
each 100
hours
operation.
If necessary
9