Adesso 2120-22 조립 지침

{카테고리_이름} Adesso 2120-22에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Adesso 2120-22 2 페이지.

CONEY LARGE LED FERRIS WHEEL LAMP

Assembly Instructions (English)

ASSEMBLY INSTRUCTIONS FOR

Model # 2120-22

1. Insert cord plug into the driver.

* We have included replacement LED's if needed.

If an LED goes out, please unscrew the lamp shade,

then use pliers to unscrew the two tiny screws

holding the LED in place. Remove the broken LED

and replace it with the new LED. Then secure the

new LED with the two tiny screws and screw the

lamp shade back on.

GENERAL PRODUCT INFORMATION:

This product is suitable

for dry locations only.

IMPORTANT SAFETY INSTRUCTIONS:

This portable lamp has a polarized plug (one

blade is wider than the other) as a feature to

reduce the risk of electric shock. This plug will ﬁt

in a polarized outlet only one way. If the plug does

not ﬁt fully in the outlet, reverse the plug. If it still

does not ﬁt, contact a qualiﬁed electrician. Never

use with an extension cord unless plug can be

fully inserted. DO NOT ALTER THE PLUG.

BULB TYPE: (1) 20 x 0.5W Integrated LED

PARTS DIAGRAM:

1) LED Chip

2) Tornillo

Cord

21 Penn Plaza Suite 909 New York, NY 10001

Tel: (212) 736 4440 Fax: (212) 736 4806

2120-22

1.0

Driver