Hikmicro E1L 사용자 설명서 - 페이지 8
{카테고리_이름} Hikmicro E1L에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hikmicro E1L 13 페이지. Handheld thermography camera
페이지 인쇄
Laser
IR Lens
Trigger
The warning sign is under and on the left of the laser.
Charging
Indicator
USB
Interface
Trigger
The laser radiation emitted from the device can
cause eye injuries, burning of skin or
inflammable substances. Prevent eyes from
direct laser. Before enabling the Light
Supplement function, make sure no human or
inflammable substances are in front of the laser
lens. The wave length is 650 nm, and the power
is less than 1 Mw. The laser meets the
IEC60825-1:2014 standard.
3 Basic Operations
3.1 Charging the Device
Steps:
1.
Open the top cover of the camera.
2.
Connect the USB interface and the power
adaptor with USB cable.
Cover
When the device is charging,
the LED indicator is red.
When the device is fully
charged, the LED indicator is
green.
Charge the battery and export
snapshots with the USB cable.
Pull the trigger to capture
snapshots.
When the Laser function is
switched on, pull the trigger to
turn on/off the laser light.
Warning:
USB interface
USB Interface
Micro SD Slot
Tripod
Interface