Dynojet Power Vision 설치 매뉴얼 - 페이지 4
{카테고리_이름} Dynojet Power Vision에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet Power Vision 7 페이지. For 2019-2022 can-am ryker 600/900
Dynojet Power Vision에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지), 설치 매뉴얼 (6 페이지), 설치 매뉴얼 (8 페이지), 설치 매뉴얼 (7 페이지), 매뉴얼 (7 페이지), 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (7 페이지)
페이지 인쇄
VIEWING THE VEHICLE INFORMATION
This menu allows you to view the device status (paired/not
paired), VIN #, Model ID, ECU serial number, tune compat, and
checksum compat.
Select Vehicle Tools>Vehicle Information.
VIEWING THE DIAGNOSTIC CODES
This menu allows you to read and clear diagnostic trouble
codes.
1
To read codes, select Vehicle Tools>Diagnostics>Active
Codes.
2
To clear codes, select Vehicle Tools>Diagnostics>Clear
Codes.
RESTORING THE ECU
This menu allows you to restore the ECU. Use Restore ECU if
the device does not complete the flash or if your vehicle will
not start.
Select Vehicle Tools>Restore ECU.
CONFIGURING GAUGES
Make your Power Vision device yours; display the channels
you want to see with four user-customizable full-color gauge
screens. Each gauge screen has four configurable channels.
Monitor channels such as Wideband, AFR, Boost, and integrated
belt temperature sensor. Sample gauges shown here; for
a complete list of monitors available, open the tune file in
Power Core or scroll through the gauges on the device when
configuring or selecting channels for the list of options.
1
From the Main Menu, select Device Tools > Configure Gauges.
2
Select a gauge screen and press Enter.
3
Select a channel and press Enter.
4
Select a channel from the list and press Enter.
5
Select the precision or units for that channel and press Enter.
6
Continue setting up the remaining channels as desired.
7
Continue configuring the remaining gauge screens as desired.
4 CAN-AM X3 INSTALLATION GUIDE
VEHICLE TOOLS
VEHICLE INFORMATION
DIAGNOSTICS
DELETE DATA LOGS
VEHICLE TOOLS
VEHICLE INFORMATION
DIAGNOSTICS
DELETE DATA LOGS
IPV3-2501C