CORBERO KNG-PF320SGB 설치 및 사용자 지침 매뉴얼 - 페이지 2

{카테고리_이름} CORBERO KNG-PF320SGB에 대한 설치 및 사용자 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CORBERO KNG-PF320SGB 11 페이지. Built-in gas hob

INTRODUCTION
Thank you for purchasing a new Gas Hob
KNG-PF320SGB
Even if you have used a gas hob before, it is important that you read these instructions thoroughly before starting to cook,
paying particular attention to the installation and safety instructions. If you have any problems with installing, operating, or
cooking with your hob, please check through these instructions thoroughly to make sure that you have not missed anything.
WARNING!
For your own safety, make sure that these instructions on Installation, use and maintenance are
followed.
We advise you to keep these instructions in a safe place for future reference. If you sell or transfer ownership of this
product, please pass on these instructions to the new owner.
YOUR HOB
Applicable For gas
Model
KNG-PF320SGB
KNG-PF640STGB-1
CLEANING
VITREOUS ENAMEL
Hotplate, burner caps, pan supports.
Cloth wrung out in hot soapy water. Stubborn stains. Can be removed with a cream paste
approved by the Vitreous Enamel Development Council, liquid cleaner or by rubbing with fine steel wool soap pads.
NOTE: The pan supports can also be cleaned in the dishwasher.
ALUMINIUM
Hotplate burner bodies.
Similar to paint cleaning above. Use a nylon brush to remove any cleaning materials, water or dirt from the
hotplate burner bodies. After cleaning, wipe dry and refit to the hob ensuring they are correctly seated. Check
parts are reassembled correctly by lighting the burners and allowing to dry out.
PLASTIC Control
knobs.
Wipe with a cloth wrung out in hot soapy water.

STAINLESS STEEL

Cloth wrung out in hot soapy water.
Rapid burner
3.0kW
Auxiliary burner
1.75kW
Power(kW)
3.0+1.75
3.3+1.75+1.75+1.0
Material
FFD
Power Supply
Glass
Yes
220~240V~ 50/60Hz
Glass
Yes
220~240V~ 50/60Hz
2
Triple Ring burner 3.3kW
Auxiliary burner 1.0kW
KNG-PF640STGB-1
Size (mm)
520×300×100
600x510x100
Semi-rapid
burner
1.75kW
Semi-rapid
burner
1.75kW
Built-in
(mm)
480×280
560×480