KitchenAid Architect II KDDC24FVS 설치 지침 및 사용 및 관리 매뉴얼 - 페이지 12
{카테고리_이름} KitchenAid Architect II KDDC24FVS에 대한 설치 지침 및 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid Architect II KDDC24FVS 18 페이지. Double refrigerator drawers/refrigerator freezer drawers/double freezer drawers
페이지 인쇄
To adjust set point temperatures:
Press the refrigerator or freezer PLUS (+) or MINUS (-) touch
pad until the desired temperature setting is reached.
NOTE: The set point range for the refrigerator drawer is 34°F
(1°C) to 45°F (7°C). The set point range for the freezer drawer
is -5°F (-20.5°C) to 5°F (-15°C).
Max Cool or Max Freeze
The Max Cool or Max Freeze feature assists with periods of heavy
usage, full grocery loads or temporarily warm room temperatures.
Style 1: Double Refrigerator Drawers
Max Cool will reset the temperature for both drawers to the
coldest setting 34°F (0.5°C) for 24 hours.
Style 2: Refrigerator/Freezer Drawers
Max Cool will reset the temperature for both drawers to the
coldest setting 34°F (0.5°C) in the refrigerator drawer and -5°F
(-20.5°C) in the freezer drawer for 24 hours.
Style 3: Double Freezer Drawers
Max Freeze will reset the temperatures for both drawers to the
coldest setting -5°F (-20.5°C) for 24 hours.
NOTE: The temperature display will remain at the coldest
setting(s) and the indicator light will remain on for 24 hours. After
24 hours, the drawer will return to the previous temperature set
point(s) and the indicator light will turn off.
Holiday Mode
Holiday Mode is designed for the traveler or for those whose
religious observances require turning off the lights. By selecting
this feature, the temperature set points remain unchanged and the
interior lights will turn off. For most efficient refrigerator drawers
operation, it is recommended to exit the Holiday Mode when it is
no longer required.
Press and hold the Holiday Mode touch pad for 3 seconds to
turn on the feature. The indicator will light up.
Press and hold Holiday Mode touch pad for 3 seconds to turn
the feature off.
Control Lock
The control panel can be locked to avoid unintentional
temperature changes by small children or during cleaning.
Press and hold the Control Lock touch pad for 3 seconds to
turn on the feature. The indicator will light up.
To deactivate the feature, press and hold Control Lock touch
pad for 3 seconds.
NOTE: When Control Lockout is activated, the control panel
touch pads will not work. Any attempt to change the settings will
result in a beep to indicate the control panel is locked.
12
Drawer Open/Alarm Reset
The Drawer Open alarm will sound and the Alarm Reset indicator
will light up when a drawer has been open for longer than
10 minutes.
To temporarily disable the Drawer Open alarm, press and hold the
Alarm Reset touch pad for 3 seconds. Closing the drawer will stop
the audible alarm and reset the 10-minute timer.
Ice Maker and Water Filtration System
(on Refrigerator/Freezer Drawers and
Double Freezer Drawers only)
IMPORTANT: After connecting the refrigerator to a water source
or replacing the water filter, fill and discard three full containers of
ice to prepare the water filter for use, before using ice.
Turning the Ice Maker On/Off
IMPORTANT: Use the Ice On touch pad on the control panel to
turn the ice maker on or off. Do not adjust the wire arm located on
the ice maker.
Press and hold the Ice On touch pad for 3 seconds to turn the
ice maker ON. The indicator will light up.
Press and hold the Ice On touch pad for 3 seconds to turn the
ice maker OFF.
REMEMBER:
Allow 24 hours to produce the first batch of ice.
The quality of your ice will only be as good as the quality of the
water supplied to your ice maker.
Avoid connecting the ice maker to a softened water supply.
Water softener chemicals (such as salt) can damage parts of
the ice maker and lead to poor quality ice. If a softened water
supply cannot be avoided, make sure the water softener is
operating properly and is well maintained.
Do not store anything in the ice storage bin.
Water Filtration System
Do not use with water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or
after the system.