Adesso Espresso 690008101 사용자 설명서 - 페이지 6
{카테고리_이름} Adesso Espresso 690008101에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Adesso Espresso 690008101 8 페이지. Espresso coffee machine
페이지 인쇄USER'S MANUAL
Components description (fig. 1)
1. Capsule insertion door;
2. Water tank;
3. Light bulb;
4. Capsule insertion opening;
5. Tank cover;
6. Coffee delivery spout;
7. Coffee delivery switch;
8. Cup grid;
9. Used capsules collection drawer.
Machine supply
9
The coffee machine is supplied with:
A pair of empty capsules;
Feeding cable;
User' s manual;
Genuine packing.
Front panel
The front panel consists of a series of push-button:
Feeding light: After turn on the machine through the feeding
switch on the left side the pilot light will start.
"Coffee" push button (fig. 1, ref. 7):
a) Put the coffee push-button on the position I: Coffee delivery
will start;
b) Once the desired quantity of drink has been reached, put the
coffee push-button on the position 0: Coffee delivery will stop.
INSTALLATION
Instructions for installation
a) Remove the machine out of its package that must be kept for
future transportation. Without the genuine package the machine
warranty will not be valid;
b) Place the machine on a stable horizontal surface;
c) Connect the feeding cable into the lateral machine socket,
(fig. 2, ref. A), BUT DON'T CONNECT THE MACHINE
TO THE ELECTRIC NETWORK, before to fill the tank.
First tank filling
CAUTION
!
This operation must be carried out with the machine NOT
CONNECTED to the electric network.
a) Remove the tank access cover (fig. 3, ref. A);
b) Remove the two water pipes from the holes on the tank (fig. 3,
ref. B);
c) Remove the tank (fig. 3, ref. C) from its housing and fill it with
potable water, preferably with low limestone content
(less than 25°F – French degrees);
d) Place the tank inside the proper opening;
e) Insert the two water pipes into the holes on the tank (fig. 3, r e f. B);
f) Replace the tank access cover (fig. 3, ref. A).
CAUTION
!
Pay attention not to exceed the tank capacity.
Make sure that there are no drops of water or splashes outside
the tank. If any, dry with a clean cloth.
Don't fill excessively the tank, must contain about 2 liters.
ADVICE
You may fill the tank using a funnel and a bottle.
USE
Turning on
a) Power the machine by connecting it to the electric network
inserting the plug into the wall socket;
b) Turn on the machine by pushing the switch on the left side (fig.
2, ref. B);
c) Turn on the machine the pilot light (fig. 2, ref. B) positioned on
the switch, will start lighting until r e aching the correct temperature.
Use instructions
CAUTION
!
Use only original capsules. The use of different capsules
damages the machine.
Let the capsule slide into position.
Never for any reason, use tools, other objects or fingers to
force the capsule inside the slot as this can be dangerous for
your fingers and can damage the machine.
First cycle: washing
When using the machine the first time, before and after a long period
(for example: weekend) without using it, it is r e commended to carry
out a machine washing operation as shown in chapter "Washing".
Drinks preparation
a) Place a cup or a glass under the delivery switch;
b) Open the pod insertion opening as shown as in fig. 1, ref. 1;
c) Place a capsule inside the proper opening as shown as in fig. 1,
ref. 4;
d) Close the capsule insertion door completely as shown as in fig. 1, ref. 1;
e) Put the coffee push-button (fig. 1, ref. 7) on the position I: Coffee
delivery will start;
f) Once the desired quantity of drink has been reached, put the
coffee push-button (fig. 1, ref. 7) on the position 0: Coffee
delivery will stop;
g) You can take out the drink. The empty capsule remains inside the
machine until the new capsule is inserted;
h) Remember to remove the empty capsules on the used capsule
collection drawer (fig. 1, ref. 9).
CAUTION
!
If the door (fig. 1, ref. 1) isn't completely closed the machine
doesn't deliver coffee or hot water.
Under NO circumstances use foreign objects to push
the capsule into the opening.
10