Dynojet Power commander V 설치 지침 매뉴얼 - 페이지 6

{카테고리_이름} Dynojet Power commander V에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dynojet Power commander V 6 페이지. 2017-2018 polaris scrambler 1000, 2017-2018 polaris sportsman 1000
Dynojet Power commander V에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (9 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (5 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 (5 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (8 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (8 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (4 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (5 페이지), 설치 매뉴얼 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 및 사용 설명서 (8 페이지), 설치 지침 및 사용 설명서 (6 페이지), 설치 매뉴얼 (4 페이지), 설치 매뉴얼 (7 페이지), 설치 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (5 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (8 페이지), 설치 매뉴얼 (5 페이지), 설치 매뉴얼 (9 페이지), 설치 매뉴얼 (4 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 (5 페이지), 설치 지침 (7 페이지), 설치 지침 (4 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (5 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 (5 페이지), 설치 지침 (4 페이지), 설치 지침 (4 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 (5 페이지), 설치 지침 (5 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 (4 페이지), 설치 지침 (4 페이지), 설치 매뉴얼 (6 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 (4 페이지), 설치 지침 (5 페이지), 설치 지침 (5 페이지), 설치 매뉴얼 (6 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (7 페이지), 설치 지침 매뉴얼 (6 페이지), 설치 지침 (4 페이지), 설치 지침 매뉴얼 (6 페이지)

Dynojet Power commander V 설치 지침 매뉴얼
FIG.J
FIG.K
FIG.L
17-065
www.powercommander.com
12 Continue to route the remainder of the PCV wiring harness downward by the
steering stem and to the left, where the front ignition coil is located (Fig. J).
13 Unplug the YELLOW/RED wire on the front ignition coil.
14 Connect the set of RED wires of the PCV harness in-line with the coil and
theYELLOW/RED wire.
15 Unplug the GREEN/WHITE wire on the front ignition coil.
16 Connect the set of GREEN wires of the PCV harness in-line with the coil and
the GREEN/WHITE wire (Fig. K).
The GREEN/WHITE wire is the one closer to the steering stem.
17 Unplug the stock O2 sensor.
T his connection is under the seat next to where the PCV is installed. It is a
BLACK, 4 pin connector.
18 Plug the O2 Optimizer into the stock wiring harness (Fig. L).
The stock O2 sensor will no longer be connected to anything and can be removed
from the system if desired.
19 Use the supplied zip ties to the tie up the PCV harness, being sure to keep it
free and clear of any hot or moving parts.
20 Reinstall the clutch snorkel (if removed), plastic covers, shifter knob, key
switch, and seat.
15-16 Kawasaki Brute Force 750 - PCV - 6