MAINE GARDEN PRODUCTS Cold Frame 조립 지침 매뉴얼 - 페이지 4

{카테고리_이름} MAINE GARDEN PRODUCTS Cold Frame에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. MAINE GARDEN PRODUCTS Cold Frame 7 페이지.

Step 3. Top Cover Assembly

B.) Remove the plastic film from the glazing and place the side that had the printed film down in

one side of the frame. Place the center wood divider in the frame and slide the notch up tight

against the first piece of glazing. Remove the film from the second piece of glazing and place

it on the other half of the frame. It should make a fairly tight fit in the frame with the other

piece of glazing and the center divider.

C.) With everything in place slide the last remaining piece of the frame in place and attach with

screws

D.) Install the "L" brackets on each corner and the "T" brackets on each end of the center divider

using #8 x 7/8" screws

Attach the wooden strut on top of the front "T" bracket as shown in the last pic using #8 x 7/8"

screws. On the inside of the frame attach a #8 x 2" cabinet screw, centered, leaving 3/4" of the

screw out of the board

Cold Frame Assembly Instructions

M A I NE G A R DE N P RO D UC T S , I NC

6 7 L A G R A N G E R D P O B O X 2 7 4

T E L . ( 2 0 7 ) 6 1 3 - 2 9 7 3

Cold Frame Assembly Instructions

H O W L A N D , M E 0 4 4 4 8

F A X ( 2 0 7 ) 2 3 6 - 2 0 0 6

Page 4 of 6