Gama Sonic GS-97-SP 사용 설명서 - 페이지 3

{카테고리_이름} Gama Sonic GS-97-SP에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gama Sonic GS-97-SP 3 페이지.

6 Easy steps on how to install sleeve anchors.

After using the base as a template and marking the three holes.

1. Use an electric drill with a bit the size of the *sleeve, drill a hole 2.5" deep in the

desired spots (FIG 1).

2. Clean the hole from residue from the drilling.

3. Place the sleeve and anchor into the hole and make sure to leave 2" exposed (FIG 2).

4. Place the First washer over each anchor, then place the base of your unit over the

screws (FIG 2).

5. Place the second washer and spring washer over the unit and tighten clockwise with

the provided nuts (FIG 3).

6. After finishing place the black decorative cap over the nuts.

FIG 1

FIG 3

*The sleeve is the outer part that is covering the screws

FIG 2

Nut

Spring washer

Second washer

First washer