Hikobike ENDURO 2022 사용자 설명서 - 페이지 9

{카테고리_이름} Hikobike ENDURO 2022에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Hikobike ENDURO 2022 17 페이지.

QUICK START

- RIDING THE BIKE

If the battery is off the bike - check the battery capacity:

The LEDs on the battery by the button show the battery charge level. Make sure it is well charged

before riding. The most common reason for running out of charge is leaving home with only part

charge.

When the battery is on the bike, turn on the C600 display by pressing down the ON button on the

handlebar keypad. Check that you have at least most of the charge bars lit and that the voltage is

48V or more.

When you first turn on the bike the default is 0 (no assist). Select the level of assist from 0 - 5. You

can change this as you go along using the + and – button.

You can hold down the SET button for 3 seconds to select/change POWER, STANDARD or ECO riding

mode. Hold down SET to return.

Start pedalling to start the motor.

Select the appropriate gear.

Pulling on either the front or rear brake level will stop the motor immediately.

For optimum battery life, try to avoid riding your HIKOBIKE until the battery is completely flat.

Turn off the power assist as soon as you notice the battery has lost power and pedal the bike

home, charging the battery as soon as possible.

The thumb lever next to the controller will give you a boost of power when you want it to.