Maine Ornamental Solar Tiffany-style Post Cap 설치 지침 매뉴얼 - 페이지 2
{카테고리_이름} Maine Ornamental Solar Tiffany-style Post Cap에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Maine Ornamental Solar Tiffany-style Post Cap 20 페이지.
페이지 인쇄Thank you for your purchase. The following pages contain information
to help you install and maintain your post caps for years of enjoyment.
Installation Instructions
If your post cap is not listed here, please check for installation instructions
inserted in or printed on the package.
Post Caps
To attach each post cap style to the post, ap-
ply an exterior-grade construction adhesive
to the underside of the post cap and place
firmly on the post (see Figure 1).
Important: All solar post caps and lights
will need 24 hours of direct sunlight
to charge the batteries (allow 72 hours
for maximum charge).
Solar Post Caps
To activate your new solar post cap:
1 Remove top by pressing inward on the side
of the clear lens, grasping the edge of the
top and lifting it off (see Figure 2).
2 Install the batteries.
3 Replace top by snapping onto side panels.
(Ensure the holes in the sides are matched
up with the stubs on the top.)
2
Figure 1
PRESS TO
REMOVE
TOP
Figure 2