CORBERO TT 120 F 지침서 - 페이지 11

{카테고리_이름} CORBERO TT 120 F에 대한 지침서을 온라인으로 검색하거나 PDF를 다운로드하세요. CORBERO TT 120 F 18 페이지.
CORBERO TT 120 F에 대해서도 마찬가지입니다: 지침서 (16 페이지), 지침서 (18 페이지)

페이지 인쇄
CORBERO TT 120 F 지침서
Ins
Ins

Technical data

Model/Type
Gross capacity (l)
Net capacity (l)
Width (mm)
Height (mm)
Depth (mm)
Energy consumption (kWh/day)
(kWh/year)
Energy class, according to EU Standards
Freezing capacity (kg/24h)
Rising time (h)
Rated power (W)
Weight (kg)

Installing the appliance

Transportation, unpacking

It is recommended to deliver the appliance in
original
packaging,
considering the protective warning on packaging.
After each transportation the appliance must not be
switched on for approx. 2 hours.
Unpack the appliance and check if there are damages
on it. Report possible damages immediately to the
place you bought it. In that case retain packaging.

Cleaning

Remove every adhesive tape, which ensure the parts
not to move in the appliance.
Wash the inside of the appliance using lukewarm
water and mild detergent. Use soft cloth.
After cleaning wipe out the inside of the appliance.
tr
uctions f
tr
uctions f
CV 850 S/9 (TT 120 F)
117
100
550
850
600
0.90
329
120
39
in
vertical
position
or the Ins
or the Ins
C
16
17

Placement

The ambient temperature has an effect on the
energy consumption and proper operation of the
appliance. When placing, take into consideration
that it is practical to operate the appliance between
ambient temperature limits according to the climate
class that is given in the chart below and can be
found in the data label.
Class of climate
SN
N
ST
If the ambient temperature goes below the lower
data the temperature of the cooling compartment
can go beyond the prescribed temperature.
If the ambient temperature goes beyond the upper
data this means longer operating time of the
compressor, increasing temperature in the freezer
or increasing energy consumption.
t
aller
t
aller
Ambient temperature
+10 ... +32 °C
+16 ... +32 °C
+18 ... + 38 °C
GB
25