Gama Sonic WESTON GS-53PIR-FPW 사용 설명서 - 페이지 2

{카테고리_이름} Gama Sonic WESTON GS-53PIR-FPW에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gama Sonic WESTON GS-53PIR-FPW 5 페이지. Solar lamp with motion sensor

Please read the instruction manual carefully to obtain the best results from your purchase.

Tools that are needed but not supplied with the solar post lamps are: a screw driver and a

power drill.

Note:

For best results, allow the solar lamp to be charged for two consecutive sunny days in

position

the "On"

Solar Lamp Location:

For optimum light duration throughout the night, it is very important to place the solar lamp in

a spot where it will receive the maximum amount of direct sunlight throughout the day.

Installation Instructions (Fig. 1)

GS-53P-PIR (Post Mount)

1. Use an electric drill to make four holes in the desired surface. Place provided

anchors into holes, place the base of the lamp (C) in line with the holes and

attach with the provided screws.

2. Screw part (A) into Part (C) and turn the On/Off switch in the lamp head (A) to

ON position according (Fig. 2).

GS-53W-PIR (Wall Mount)

NOTE: Install your solar lamp facing the south for best results.

1. Use an electric drill to make two holes in the wall, place provided anchors into

holes, place the wall bracket in line with the holes and attach with the provided

screws.

2. Screw part (D) into Part (A) and turn the On/Off switch in the lamp head (E) to

ON position according (Fig. 2).

GS-53F-PIR (3" Fitter Mount)

NOTE: If you are replacing an existing gas/electric post light, you must consult a certified

technician to disconnect them before installation.

1. Screw Part (B) on top of the existing 3" post using the screws provided.

2. Screw Part (A) into Part (B) and turn the On/Off switch in the lamp head (E) to

ON position according (Fig. 2).