Dea GULLIVER 사용 설명서 - 페이지 5
{카테고리_이름} Dea GULLIVER에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dea GULLIVER 20 페이지. Electromechanical operators for industrial sliding gates
2 PRODUCT DESCRIPTION
Models and contents of the package
The name GULLIVER identifies a series of electromechanical operators for industrial sliding gates with different features as to motor
and control board power supply voltage, capacity, mechanical adjustment of force and built-in limit switch.
GULLIVER is completed by a set of accessories listed in the "PRODUCT ACCESSORIES" table (page I-6). This operator is composed of
a mechanical gear motor which rotates the driving gear; This gear, coupled to the rack properly installed on the gate, converts the circular
motion of the gear motor into rectilinear motion thus allowing the movement of the gate on its own guide.
Inspect the "Contents of the Package" (Pic. 1) and compare it with your product for useful consultation during assembly.
Transport
GULLIVER is always delivered packed in boxes that provide adequate protection to the product, however, pay attention to all informa-
tion that may be provided on the same box for storage and handling.
3 TECHNICAL DATA
Motor power supply voltage (V)
Absorbed power (W)
Max Thrust (N)
Duty cycle (cycles/hour)
Maximum n° of operations in 24 hour
Built-in capacitor (µF)
Operating temperature range (°C)
Motor thermal protection (°C)
Opening speed (m/min)
Weight of product with package (Kg)
Sound pressure emitted (dBA)
Protection degree
Power supply (V)
Fuse F2 (A)
Fuse F1 (A)
230V operators outputs
Auxiliaries power supply output
Safety devices power supply output
"Warning" output
Electric lock output
230V Flashing light output
24V Flashing light output
Operating temperature range (°C)
Receiver frequency
Transmitters type of coding
Max remote controllers managed
OPERATOR
18NET - 18NET/M - 18/IB - 1503E
230 V ~ ±10% (50/60 Hz)
560
1300
15 (leaf L=12m)
240
30
140 °C
10
CONTROL BOARD
NET230N
230 V ~ ±10% (50/60 Hz)
24 V ~
24V
230 V ~ max 150W
max 1 art. 110 or 24V
230 V ~ max 40W
24 V
max 100mA (for led flashing light) art. LED24AI or
open gate warning light/courtesy light
HCS fix-code - HCS rolling code - Dip-switch
25RRT - 25RRTF - 25RRT/M - 25/IB
400 V ~ ±10% (50/60 Hz)
1200
1650
17 (leaf L=14m)
280
-
-20 ÷ 50 °C
-
10
30
< 70
IPX4
5A
160mA
2 x 600W
(24V_AUX + 24V_ST = max 200mA)
output max 5W configurable
-20÷50 °C
433,92 MHz
100
EN-3