Gama Sonic BAYTOWN II GS-105P 사용 설명서 - 페이지 4

{카테고리_이름} Gama Sonic BAYTOWN II GS-105P에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gama Sonic BAYTOWN II GS-105P 7 페이지. Baytown ii solar lamp

3. Assembly Instructions:

GS-105F:

Note: If you are replacing an existing gas/electric post light, you must consult a certified

technician to disconnect them before installation.

Attach the fixture (D) to the base (H) with the four supplied

screws, as shown (Fig.1).

GS-105P

Note: There are specific types of screws for specific surfaces. If you're unsure of the

appropriate type of screw to use on your desired surface, please consult a professional.

1. Use a drill to make two holes in the desired surface.

2. Place the screw anchors into the holes and place the

lamp in line with the holes and secure it with the

provided screws.

3. Detach Part (H) from Part (E)

4. Attach the base (H) to the pier mount (G) with the

(Fig.2).

Attach the fixture (D) to the base (H) with the four

supplied screws, as shown in (Fig.3).

GS-105W

Note: Installing the light on a wall may limit the solar panel for sun exposure.

Make sure the lamp is mounted so direct sun exposure is available.

1. Use a drill to make two holes in the desired surface.

2. Place the screw anchors into the holes and place the lamp in line with the

holes and secure it with the provided screws.

3. Detach Part (H) from Part (E)

4. Attach the base (H) to the

5. Attach the fixture (D) to the base (H) with the four supplied screws, as shown

(Fig.5).

Fig.4

wall bracket (F)

with the

Fig.5

nut

Fig.2

nut

(Fig.4).

Fig.1

Fig.3