Gama Sonic GS-114W 사용 설명서 - 페이지 3

{카테고리_이름} Gama Sonic GS-114W에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gama Sonic GS-114W 5 페이지. Prairie solar lamp w/changeable mounting options
Gama Sonic GS-114W에 대해서도 마찬가지입니다: 사용 설명서 (8 페이지)

페이지 인쇄

Installation Instructions

GS-114P (Fig. 3)

1. Use a drill to make two holes in the desired surface,

2. Place the white screw anchors into the drill holes, place the lamp in line with the

holes and screw down with the provided screws

Note: There are specific types of screws for specific surfaces. If unsure of the

appropriate type of screw to use on your desired surface please consult a

professional.

GS-114W (Fig. 4)

NOTE: For best results locate your solar lamp facing the south.

1. Use electric drill to make two holes in the wall, place provided anchors into holes, place

the wall bracket in line with the holes and screw the provided screws.

2. Assembly part (A) into the wall bracket by turning it using the screw provided.

GS-114F (Fig. 5)

NOTE: If you are replacing an existing gas/electric post light, you must consult a

certified technician to cancel them before installation.

1. Position Part (C) on top of the existing 3" post and tighten it using the screws

provided.

2. Screw in part (A) into part (C) using the screw provided.

Replacing the Batteries (Fig. 6)

(After several years of use, the battery may need replacing).

1. Unscrew the two screw caps and detach part (C) from part (B). Make sure the ON/OFF

switch is in the OFF (O) position.

2. Unscrew the battery compartment screws.

Fig. 4

Fig. 3

Fig. 5