Corbin Russwin Access 800 설치 지침 매뉴얼 - 페이지 12

{카테고리_이름} Corbin Russwin Access 800에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Corbin Russwin Access 800 17 페이지. Cl33800 tcac2 series cylindrical lockset
Corbin Russwin Access 800에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (16 페이지), 프로그래밍 지침 (16 페이지)

페이지 인쇄

Lock Operational Check For devices with cylinders:

1. Insert key into cylinder and rotate. (There should be no friction against lock case, wire

harness or any other obstructions - refer to Section 4, Step 5 if friction exists)

2. The key will retract the latch, key should rotate freely. If the deadbolt is thrown, the key will

first retract the deadbolt and then the latch. Inside lever retracts latch and deadbolt, if

provided.

3. Enter 1234

to unlock outside lever handle allowing the lever to retract latch and deadbolt, if

provided.

4. If lock is prox only (M802) or RF Technology with prox (M805) - refer to keypad

programming instructions (FM 224) to program lock using Accessware software.

Corbin Russwin, Inc.

225 Episcopal Road

Berlin, CT 06037-4004

www.corbinrusswin.com

opyright 2007

6) Operational Check

Technical Product Support:

Corbin Russwin, Inc.

Phone 800-810-WIRE (9473)

C A U T I O N

DOOR MUST REMAIN OPEN

DURING INSTALLATION.

USE DOOR STOP.

TEST

FOR PROPER

OPERATION

BEFORE

CLOSING

DOOR

Canada: Assa Abloy DSS Canada

160 Four Valley Drive

Vaughun, ONT L4K 4TG