Dea LOOK 352/SC 사용 지침 및 경고 - 페이지 8

{카테고리_이름} Dea LOOK 352/SC에 대한 사용 지침 및 경고을 온라인으로 검색하거나 PDF를 다운로드하세요. Dea LOOK 352/SC 20 페이지. Electro-mechanical operator for swing gates

페이지 인쇄

7 MAINTENANCE

Good preventive maintenance and regular inspection ensure

long working life. In the table below you will find a listo f inspections/

maintenance operations to be programmed and executed periodi-

cally.

Consult the TROUBLE-SHOOTING" table whenever anomalies are

observed in order to find the solution to the problem and contact

DEA System directly whenever the solution required is not provided.

Description

When the opening command is given, the leaf fails to move

and the operator's electric motor fails to start.

When the opening command is given, the motor starts but

the leaf fails to move.

The operator jerks during movement.

8 PRODUCT DISPOSAL

LOOK consists of materials of various types, some of which can be recycled (electrical cables, plastic, aluminum, etc. ..) while others

must be disposed of (electronic boards and components).

Proceed as follows:

1. Disconnect the power supply;

2. Disconnect and disassemble all the accessories connected. Follow the instructions in reverse to that described in the section "Installa-

tion";

3. Remove the electronic components;

4. Sorting and disposing of the materials exactly as per the regulations in the country of sale.

WARNING In line with EU Directive 2002/96/EC for waste electrical and electronic equipment (WEEE), this electrical product must

not be disposed of as unsorted municipal waste. Please dispose of this product by returning it to your local municipal collection

point for recycling.

INTERVENTION TYPE

cleaning of external surfaces

checking of screw tightening

checking of release mechanism operation

greasing of articulated joint

TROUBLE-SHOOTING

The operator is not receiving correct power supply. Check all connections, fuses, and the

power supply cable conditions and replace or repair if necessary.

Check that the unlocking system is closed (see Pic.8).

Make sure that the electronic device for electric power adjustment is in good condition.

If the piston remains at the complete end of its stroke when the gate is closed, review the

assembly procedure.

If the leaf does not move freely, release the ram and readjust the rotation points.

The power of the gear motor may be insufficient for the characteristics of the gate's wing;

check the choice of model whenever required.

The operator's front and rear attachments bend or are not fastened correctly. Repair or

replace.

Possible solutions

PERIODICITY

6 months

1 year