Corbin Russwin ASSA ABLOY Access800 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Corbin Russwin ASSA ABLOY Access800에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Corbin Russwin ASSA ABLOY Access800 20 페이지. For ml20800 tcac2 series mortise lockset

Verify hand and bevel of door. Illustrations shown are as viewed from the outside
1
or secure side of opening.
Left Hand
Hinges Left.
Open Inward.
"LH"
Prep door according to supplied door marker.
2
7/8"
C of 1-1/2 Dia
.
L
1-1/2
Install conduit half with recessed
panel "Not For Use On Fire Door"
visible from outside of door.

4) Installation Instructions

Left Hand
Reverse Bevel
Hinges Left.
Open Outward
"LHR"
Outside
of Door
Hole for ribbon cable
1/8" Dia. holes
(2) required
Fire stop plate required
for fire rated doors
Slot
Attach fire stop plate
using self tapping screws
#8-32 x 1/2 long for wood &
metal doors
Non Fire Rated Exterior Doors
install weather conduit.
(Hollow Doors Only)
Right Hand
Hinges Right.
Open Inward.
"RH"
Non Fire Rated Door
5
ASSA ABLOY
Right Hand
Reverse Bevel
Hinges Right.
Open Outward
"RHR"
The optional conduit is available
for non fire rated doors to provide
weather protection for exterior door
applications. It is included in the M99
Weatherseal Gasketing Kit when
ordered with the device. If ordered
separately, order part number
794F929.
Hole for
ribbon cable
Outside
of Door
ElectroLynx® is a registered trademark of ASSA ABLOY Inc.
Copyright © 2014 Corbin Russwin, Inc. All rights reserved.
Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
®