Gama Sonic GS-94S-PIR 사용 설명서 - 페이지 4

{카테고리_이름} Gama Sonic GS-94S-PIR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gama Sonic GS-94S-PIR 6 페이지.

Assembly Instructions

NOTE: The following steps are for reference only. Consult your local hardware store for the best installation

method for your particular surface.

NOTE: The solar light must be charged in the ON position for two sunny days for best results.

GS-94NS-PIR

1. Use an electric drill to make three holes into a solid surface no smaller than the fastening

screws (G). The holes shall be lined up with the holes of the lamp base (F).

2. Put the fastening screws (G) into the drilled holes with their threaded ends facing up (Fig. 3).

3. Place lamp base onto fastening screws and secure base with the nuts using a wrench (Fig. 4).

4. Make sure the lamp base (F) is stable before installing Part (D).

5. Place part (D) on top of part (F) and tighten with the provided screws (E) using a wrench.

6. Screw part (C) to part (D), part (B) to part (C) and part (A) to part (B).

Fig. 3

Fig. 4

A. Long Distance: 20-25 ft

B. Medium Distance: 12-15 ft

C. Short Distance: 8-12 ft