Corbin Russwin Rim & SecureBolt ED4200 series 설치 지침 매뉴얼 - 페이지 2
{카테고리_이름} Corbin Russwin Rim & SecureBolt ED4200 series에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Corbin Russwin Rim & SecureBolt ED4200 series 12 페이지. Exit devices
페이지 인쇄Maintenance
1. Periodically remove covers and coat mechanisms with a
silicone base lubricant. This is particularly required in
corrosive environments for proper product function.
2. Check mounting fasteners periodically. Retighten if
found loose. Apply screw looking compound (available
at automotive part stores) or change part fasteners if
screws continue back up.
3. Periodic checks and adjustments of strike are required to
compensate for changes in the opening (e.g.; door
sagging, etc....).
Specify Finish
Device
(No Trim)
(With Trim)
Fire Mullion (Add)
General Information
Recommended for un-reinforced metal doors.
Standard for Fire Rated Doors.
Rim Qty
SecureBolt
4
2
4
2
ED 4200, ED4200S
For Narrow Stile Metal Doors of Either
Hand
ED 4200M, ED4200MA, ED4200S,
ED 4200SMA
For Metal, Composite and Wood Doors of
Either Hand
Shim Kit Option
697F35-8, Black Finish
Kit consists of (2) Latch Head Shims
(Device Cover seats on shim) and (2)
End Cap Shims (End Cap Shims (End
Cap seats on shim).
Each shim is 1/8ʼ (3.2mm) thick.
More than two shim thicknesses
1/4" (6.4mm), require longer device
mounting screws (not included).
Qty
®
6
2
4
Size
1/4 - 20
1/4 - 20
10 - 24