Corbin Russwin Access 800 설치 지침 매뉴얼 - 페이지 7
{카테고리_이름} Corbin Russwin Access 800에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Corbin Russwin Access 800 16 페이지. Cl33800 tcac2 series cylindrical lockset
Corbin Russwin Access 800에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (17 페이지), 프로그래밍 지침 (16 페이지)
페이지 인쇄
7
Outside Escutcheon Installation
1A. For fire rated doors feed ribbon cable connector and ground wire from outside escutcheon
through the fire stop plate.
1B. For non-fire rated door applications, optional gaskets may be used as a weather seal
between the escutcheon and the door surfaces. An optional conduit is also available for
further protection. Feed ribbon cable connector and ground through the conduit (if used).
2. Slide the outside escutcheon over the lock, and hold the escutcheon to the door surface.
C A U T I O N
DOOR MUST REMAIN OPEN
DURING INSTALLATION.
USE DOOR STOP.
Installation Instructions
Gasket
(optional)
6
GASKET APPLICATION:
Peel off the adhesive protective paper from
gasket. Feed Keypad ribbon cable and ground
wire through gasket opening as shown and firmly
press gasket to escutcheon, aligning edge of
gasket with the edge of the escutcheon.