Gama Sonic 201iS60822 사용 설명서 - 페이지 3

{카테고리_이름} Gama Sonic 201iS60822에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gama Sonic 201iS60822 4 페이지. 12w solar area light with motion sensing and timer

Possible places to install the 201iS60822:

• Outside Garage • House Entryway • Patios • Garden • Driveway

• Camping Site • Rural Street • Farm • Green Belts • Square

Solar Lamp Location

For optimum light duration throughout the night, it is very important to mount your solar lamp

in a spot where it will receive the maximum amount of direct sunlight throughout the day.

Post Mount:

Assemble hardware to fixture housing as shown

in the image (make sure the curved side of the

mount faces in). Slide fixture over light post

so the curved side of the mount hugs the light

pole. Adjust the light to the desired height and

position. Then tighten the four bolts.

CAUTION: DO NOT OVERTIGHTEN SCREWS

30 – 50 feet

Fig. 2

Advice: Ideal Pole Height: 8 – 15 feet; Ideal Pole Diameter: 3 inches.

If multiple lights are purchased install between 30-50 feet apart for optimal light spread.

Surface Mount:

Make sure the alignment of your mounting

location is level and even for your solar light

installation. Drill four holes into your desired

installation surface using the lamp as a

template and place anchors in to the holes.

Position the four provided screws through the

holes of the lamp and into the anchors. Tighten

the screws to secure the lamp to the surface.

page 3

30 – 50 feet

Note: There are specific types of screws

for different surfaces. If you're unsure of

the appropriate type of screw to use on

your desired surface, please consult a

professional.

Fig. 1