Dea TEO 700 사용 지침 및 경고 - 페이지 8

{카테고리_이름} Dea TEO 700에 대한 사용 지침 및 경고을 온라인으로 검색하거나 PDF를 다운로드하세요. Dea TEO 700 16 페이지. Sectional door electromechanical operator
Dea TEO 700에 대해서도 마찬가지입니다: 사용 지침 및 경고 (20 페이지)

페이지 인쇄

7 START-UP

The start-up phase is very important to ensure maximum security and compliance to regulations, including all the requirements of EN

12445 standard which establishes the test methods for testing the automation for gates.

DEA System reminds that all installation, maintenance, cleaning or repair operations on any part of the system must be performed

exclusively by qualified personnel who must be responsible of all texts requie by the eventual risk;

7.1 Installation test

The testing operation is essential in order to verify the correct installation of the system. DEA System wants to summarize the proper

testing of all the automation in 4 easy steps:

• Make sure that you comply strictly as described in paragraph 2 "WARNINGS SUMMARY";

• Test the opening and closing making sure that the movement of the leaf match as expected. We suggest in this regard to perform

various tests to assess the smoothness of the gate and defects in assembly or adjustment;

• Ensure that all safety devices connected work properly;

• Perform the measurement of impact forces in accordance with the standard 12445 to find the setting that ensures compliance with

the limits set by the standard EN12453.

WARNING Using spare parts not indicated by DEA System and/or incorrect re-assembly can create a risk to people, animals and

property and also damage the product. For this reason, always use only the parts indicated by DEA System and scrupulously follow all

assembly instructions.

7.2 Unlocking and Manual operation

In the event of malfunctions or simple power failure, release the motor (Pic. 7) and perform the operation manually.

The knowledge of the unlocking operation is very important, because in times of emergency the lack of timeliness in acting on such

a device can be dangerous.

WARNING The efficancy and safety of manual operation of the automation is guaranteed by DEA System only if the installation has

been installed correctly and with original accessories.

8 MAINTENANCE

Good preventive maintenance and regular inspection ensure

long working life. In the table below you will find a listo f inspections/

maintenance operations to be programmed and executed periodi-

cally.

Consult the TROUBLE-SHOOTING" table whenever anomalies are

observed in order to find the solution to the problem and contact

DEA System directly whenever the solution required is not provided.

Description

The chain is noisy.

The operator does not start.

After learning the opening/closing position

the operator does not start.

Door doesn't close.

Push-button works properly, while the remo-

te does not.

Transmission distance is too short.

Chain and rotating joints lubrication

TROUBLE-SHOOTING

Causes

Chain is not sufficiently in tension.

The power plug is not properly inserted or

the fuse is damaged.

The track fixing screws are not properly

tightened or some errors occurred during

the learning procedure.

The "photocell" function is activated.

The remote has not been learnt or battery

is low.

The remote battery is low.

INTERVENTION TYPE

Check screws screwdown

Check chain tension

Possible solutions

Properly adjust the tension of the chain by

tightening the M8 nut (Pic. 6).

Check the correct insertion of the power

plug or replace the fuse.

Tighten the track fixing screws or repeat the

operator learning procedure of the stroke.

Deactivate the "photocell" function.

Learn the remote or replace the battery.

Replace the remote battery.

PERIODICITY

6 months