KitchenAid JF42CXFXDB00 서비스 포인터 - 페이지 2

{카테고리_이름} KitchenAid JF42CXFXDB00에 대한 서비스 포인터을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid JF42CXFXDB00 4 페이지. Bottom freezer built-in refrigerators

4. If the gap is still uneven, remove the four freezer basket screws, the basket, and the freezer drawer to access the drawer rails.

See figure 4.

5. If the rail screws are tight, and the gap is still uneven after replacing the freezer drawer and basket, order metal shim part

number W10123657, to be installed under the rail on the side of the drawer that needs to be raised. A maximum of two shims

can be added if necessary. See figure 5.

6. To install shim(s), remove the four screws securing the rail to the cabinet.

See figure 6. Slide the shim under the rail; reinstall and tighten the screws.

7. Replace the freezer basket and freezer drawer. Check that the drawer gasket is

sealing completely and verify that the basket is activating the freezer light switch.

Eight Rail Screws

Figure 4

1.5mm

Metal Shim

Figure 5

Four Rail Screws

Figure 6