Corby Endeva 사용 및 관리 매뉴얼 - 페이지 7
{카테고리_이름} Corby Endeva에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Corby Endeva 12 페이지. Thermoelectric 25-50 wine bottle cooler with glass door
페이지 인쇄INSTALLATION
Positioning
Do not position this product in a location where it may be subject to extreme
temperatures, where it could be exposed to direct sunlight, or next to a heat source.
The unit should be located in a cool, dry place.
Allow sufficient clearance around the Wine Cooler and ensure it is positioned on a
stable and level surface. The wine cooler has 4 feet, adjustable up to 2cm. If the wine
cooler is on an uneven surface, adjust the height of the appropriate feet to ensure the
wine cooler is level and stable.
Connection to the mains supply should be made via a suitable socket which is easily
accessbile.
Allow a 10 minute minimum interval between transit and connecting the wine cooler to
a power source.
B
Shelf installation
To install the wine cabinet shelves, slide the shelf on to the guides on the sides of
the cabinet. To remove the shelves for cleaning and maintenance etc. pull the
shelf towards you to remove it from the guides.
A
B
Always maintain sufficient clearance for
ventilation around the wine cooler:-
It is vital that an 80mm gap is left between the
wine cooler's rear and any surfaces (A)
Allow a minimum of 50mm between the wine
cooler's sides and any surfaces (B)
The air inlets and outlets must not be covererd
or blocked at any time.
0 7