Frigidaire FEC32C4AS1 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Frigidaire FEC32C4AS1에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Frigidaire FEC32C4AS1 20 페이지. Electric cooktop
Frigidaire FEC32C4AS1에 대해서도 마찬가지입니다: 부품 카탈로그 (6 페이지)

페이지 인쇄

Cooktop

Installation

1. All Ceramic-Glass Cooktops

Visually inspect the cooktop for damage. Also make

sure all cooktop screws are tight (see Figure 8).

SCREWS

Figure 8

Set the cooktop into the countertop cutout.

NOTE: Do not use caulking compound; cooktop

should be removable for service when needed.

Do not remove

the nylon

spacers on

the edges of the cooktop.

These

spacers center

the

cooktop

in the space provided.

The cooktop

must

be centered

to prevent

excess heat buildup

that

may result in heat damage

or fire (see Figure

9).

6 NYLON SPACERS

The retainer brackets MUST be installed, to meet

local codes or, in their absence, with the National

Electrical Code ANSI/NFPA No. 70--latest

edition,

or with CSA Standard C22.1, Canadian Electrical

Code, Part I (see Figure 10).

COOKTOP

COUNTERTOP

Retainer Brackets Must Be

Installed At Lest 1/16"

(O.16 cm) BELOW

Countertop

SPACER

RETAINER

BRACKET

Figure 10

2. Models: 26" and 36" (36"X18")

Coil Elements

Cooktops

Set the cooktop into the contertop cutout. Lift the

cooktop and fasten the ends of the box to the counter

with wood screws (figure 11). Lower the cooktop.

Align the knobs on the shafts and press down with

even pressure. After setting the unit into the opening,

all remaining work must be done from inside the

cabinet.

_BURNER

BOX

Figure 11

3. Models: 32" Coil Elements Cooktops

1. Place cooktop into countertop

opening and

center unit in cutout.

2. Remove all surface units and drip bowls.

3. Unit clamp down information.

Once unit is

installed in counter opening, you must clamp unit

down as shown in figure 12.

4. Put back all surface units and drip bowls.

5. Make electrical connections as outlined in

"Electrical Connection"

section.