Gamber Johnson 7160-0318-09 설치 지침 매뉴얼 - 페이지 4
{카테고리_이름} Gamber Johnson 7160-0318-09에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamber Johnson 7160-0318-09 10 페이지. Panasonic toughbook cf-31 docking station
페이지 인쇄
MOUNTING THE DOCKING STATION
Mount docking station to mounting system using the four 1/4-20 UNC mounting holes on the bottom of
the dock. Four 1/4-20 UNC x .50 Button Head Mounting Screws are provided in the hardware bag.
* Recommended torque: 75 in-lbs. Over tightening mounting hardware may damage docking
station.
* Use of hardware longer than 5/8" may damage docking station.
This docking station is designed to be used with a variety of Gamber Johnson mounting systems.
Installation instructions for other Gamber Johnson products are provided with each individual product.
Clevis
(Not Included)
If wanting to use external antenna, connected by cable
to the WAN port on the dock:
Position the switch toward the "EXT" side.
If wanting to use antenna built into the computer or PC
Card type antenna:
Position the switch toward the "INT" side.
CF-31MK1 computers are not effected by the
"Antenna Switch". To disable external antenna on
all CF-31 MK1 computers, install Panasonic service
part No. (DFHR3S40ZA, DFHR3S39ZA or
DFHR3S38ZA (dual) over the RF connection on
back of the computer. This part can be ordered
from Panasonic (1-800-527-8675) and support will
send request to service department. If the CF-31
Model No. is followed by the following Alpha's you
know it is a MK1 model: CF-32A, B/E, C, D or G.
All other CF-31 models work as stated above.
WIRELESS ANTENNA SWITCH
When attaching clevis to the dock
make sure the orientation is as
shown in picutre to the left.
Otherwise clevis will interfear with
support bracket and ports. If desired
handle can be switched to opposite
side for convenience.
Use 1/4-20 x.50 (Qty. 4) Button
Head Mounting Screws.
Wireless Antenna Switch
EXT/INT
Pg 4