Deaf Bonce AP-M60S 소유자 매뉴얼 - 페이지 5
{카테고리_이름} Deaf Bonce AP-M60S에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Deaf Bonce AP-M60S 16 페이지. Mid-range speakers
페이지 인쇄
M i x e d c o n n e c t i o n o f t h e s p e a k e r s
S e l e c t i o n o f t h e d i a m e t e r o f s p e a k e r c a b l e s
Use the table below to select the desired diameter based on the length and the power consumption.
4 . F I L T E R I N G , R E C O M M E N D E D A M P L I F I E R S E T T I N G S
The correct choice of amplifier, its settings, filtering and enclosure largely influence on the lifespan of your audio system. You
should select an amplifier with a nominal power, not exceeding the nominal power of the speakers. Proper coordination of the
head unit (HU) with the amplifier will allow to get a clean, undistorted signal applied to the component to prevent overheating
and voice coil damage. Recommended settings of the amplifier and HU: Volume of HU should not exceed 80%. The amplifier
sensitivity should be set to 50%.
The recommended filter settings:
The high pass filter HPF (the filter that cuts all frequencies below those set for the filter) should be set to 150-250 Hz
(24 dB/Oct), or 250-350 Hz (12 dB/Oct)
The low pass filter LPF (the filter that cuts all frequencies above those set for the filter) should be set to 8-12.5 kHz (12
dB/Oct)
Recommended amplifiers: AAK-OGO2500.1D, AAK-OGO1500.2D, AAK-180.4, AAK-200.4D, MFC-120.2, MFC-90.4,
MA-150.4, MA-130.4.
CAUTION!!! High sound pressure can damage your health!
Please use the common sense when controlling volume!
25 000
20 000
15 000
10 000
8000
6000
4000
2000
1000
500
250
100
0-1 1-2 2-3 3-4 4-5 5-6 6-7
Voice coil
4 Ohm х 4 MR
7-8
Cable length (m)
5
Total impedance
4 Ohm
Size
A.W.G mm²
5
16,8
8
8,37
10
5,26
2,08
14
EN