Gamber Johnson 7160-0318-10 설치 지침 매뉴얼 - 페이지 8

{카테고리_이름} Gamber Johnson 7160-0318-10에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamber Johnson 7160-0318-10 10 페이지. Panasonic toughbook cf-31 docking station

Gamber Johnson 7160-0318-10 설치 지침 매뉴얼
REMOVING COMPUTER FROM DOCK
1.
Shut down computer.
2.
Auto Lock: Insert key and rotate clockwise.
Button Lock: Unlock with key if locked. Push button in until Docking Handle releases.
3.
Lift back of the computer off the locating pins.
4.
Lift the computer out from under the Front Retainer.
The Docking Indicator LED is located on the right hand side of the dock. With the computer
installed in the dock the Docking Indicator LED can be used as a troubleshooting tool.
GREEN: All ports are ready to use.
ORANGE: USB port and LAN port do not function, external power is not connected.
RED: PC is not supported or connection is not made.
RED (BLINKING): Error has occurred in the firmware. Stop using at once and contact Panasonic
Technical Support.
NOT LIT: PC not installed or PC is OFF, Standby or Hibernation.
ETHERNET PORT INFORMATION
Ethernet ports #1 and #2 will both function when a Panasonic Toughbook CF-31 computer is
used with one of the 7160-0318-XX series Docking Stations. Gamber Johnson recommends using
Ethernet port #2 with a Panasonic Toughbook CF-31.
Only Ethernet port #1 will work if a Panasonic Toughbook CF-30 computer is used with one of
the 7160-0318-XX series Docking Stations. See page 2 for port locations.
DOCKING INDICATOR LED
Docking Indicator LED
Pg 8