HIKOKI DV 18DGAL 취급 지침 매뉴얼 - 페이지 5

{카테고리_이름} HIKOKI DV 18DGAL에 대한 취급 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKOKI DV 18DGAL 16 페이지.

페이지 인쇄

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package contains the

accessories listed on page 9.

Standard accessories are subject to change without notice.

APPLICATIONS

○ Drilling of brick and concrete block, etc.

○ Driving and removing of machine screws, wood screws,

tapping screws, etc.

○ Drilling of various metals

○ Drilling of various woods

SPECIFICATIONS

The speciﬁ cations of this machine are listed in the Table on

page 9.

NOTE

Due to HiKOKI's continuing program of research and

development, the speciﬁ cations herein are subject to

change without prior notice.

Before charging

While charging

Charging complete

Pilot lamp

(red)

Overheat standby

Charging

impossible

● Regarding the temperatures and charging time of the battery.

The temperatures and charging time will become as shown in Table 2

Battery

Charging voltage

Weight

Temperatures at which the battery can be recharged

Charging time for battery capacity, approx. (At 20oC)

1.3Ah

1.5Ah

2.0Ah

2.5Ah

3.0Ah

4.0Ah

5.0Ah

6.0Ah

Number of battery cells

Table 1

Indications of the pilot lamp

Lights for 0.5 seconds. Does not light for

Blinks

0.5 seconds. (oﬀ for 0.5 seconds)

Lights continuously

Lights

Lights for 0.5 seconds. Does not light for

Blinks

0.5 seconds. (oﬀ for 0.5 seconds)

Lights for 1 second. Does not light for

Blinks

0.5 seconds. (oﬀ for 0.5 seconds)

Lights for 0.1 seconds. Does not light for

0.1 seconds. (oﬀ for 0.1 seconds)

Flickers

Table 2

Charger

min.

CHARGING

Before using the power tool, charge the battery as follows.

1. Connect the charger's power cord to the receptacle.

When connecting the plug of the charger to a receptacle,

the pilot lamp will blink in red (At 1- second intervals).

CAUTION

Do not use the electrical cord if damaged. Have it

repaired immediately.

2. Insert the battery into the charger.

Firmly insert the battery into the charger as shown in Fig. 2.

3. Charging

When inserting a battery in the charger, charging will

commence and the pilot lamp will light continuously in

red.

When the battery becomes fully recharged, the pilot lamp

will blink in red. (At 1-second intervals) (See Table 1)

● Pilot lamp indication

The indications of the pilot lamp will be as shown in

Table 1, according to the condition of the charger or the

rechargeable battery.

UC18YKSL

14.4V – 18V

0.35

0oC – 50oC

120

150

180

4 – 10

Battery overheated. Unable

to charge. (Charging will

commence when battery

cools)

Malfunction in the battery or

the charger

UC18YFSL

0.5