Cordex TOUGHPIX II 배터리 설명서 - 페이지 3

{카테고리_이름} Cordex TOUGHPIX II에 대한 배터리 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cordex TOUGHPIX II 3 페이지. Explosion proof digital camera
Cordex TOUGHPIX II에 대해서도 마찬가지입니다: 사용자 설명서 (9 페이지), 안전한 사용을 위한 지침 (5 페이지)

페이지 인쇄

DOWNLOADING IMAGES

You can download images via the docking station, at the same time

as charging the battery. It is good practice to connect both leads to

the charging station to avoid confusion.

To download images, once both cables are connected, gently but firmly place the camera onto

the vertical interface pillar and push downwards. Once in place and turned on, the camera

motorized lens will extend and the camera screen will turn blue with the letters MSDC. If

this is a first ime installation, drivers will install automatically. Once correctly installed the

autoplay pop-up window will appear with options for accessing your camera.

When the camera is powered up and properly connected to the docking station and PC, the

camera screen will change to blue with the letters MSDC in white. The camera will show as a

drive on your PC.

Please note, if you have multiple drives already mapped on your PC and the camera does not

appear there maybe a conflict. In this instance, contact your I.T. department.

NOTE. Please ensure that the camera is fully engaged on the docking station – check that the front left camera foot is

resting behind the protruding tab on the docking station (see image). The orange rubber battery cover should be rotated

(do not bend!) and rested in the docking station recess – as this can affect connectivity between the camera and docking

station

RUGGED

AUTHORITY