Adeunis RF BINDER CONNECTOR 빠른 시작 매뉴얼 - 페이지 11
{카테고리_이름} Adeunis RF BINDER CONNECTOR에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Adeunis RF BINDER CONNECTOR 12 페이지. Pulse atex transceiver combined with a 6-pin binder connector

BINDER Connector - Guide utilisateur / User guide version V1.0.0
BINDER Connector - Guide utilisateur / User guide version V1.0.0
Binder connector - Package IoT - Quick start guide 1.0.0
1.4. Using the product with default settings
1.4.1 Daily frame
This frame (0x30) is transmitted 24 hours after the startup of the application or after the transmission of the previous Daily frame.
0
1
Code
Status
0x30
Cf Status
0x30
0xA3
Its size is of 11 bytes.
Description of the frame:
•
Byte 2 : Alarms state (bit to 1 if the alarm is activated else 0) :
•
Bit 0 – Exceeding flow on channel A
•
Bit 1 – Exceeding flow on channel B
•
Bit 2 – Tamper detected on channel A
•
Bit 3 – Tamper detected on channel B
•
Bit 4 – Leak detected on channel A
•
Bit 5 – Leak detected on channel B
•
Bit 6/7 – Reserved
•
Bytes 3 to 4 : maximum measured flow on channel A within the last 24 hours.
•
Bytes 5 to 6 : maximum measured flow on channel B within the last 24 hours.
•
Bytes 7 to 8 : minimum measured flow on channel A within the last 24 hours.
•
Bytes 9 to 10 : minimum measured flow on channel B within the last 24 hours.
In the example in grey this gives:
•
Byte 2 : Alarms = 0x19 so as (00011001) binary which gives:
•
Bit 0 = 1 – Exceeding flow on channel A
•
Bit 1 = 0 – No exceeding flow on channel B
•
Bit 2 = 0 – No tamper detected on channel A
•
Bit 3 = 1 – Tamper detected on channel B
•
Bit 4 = 1 – Leak detected on channel A
•
Bit 5 = 0 – No leak detected on channel B
•
Bit 6/7 – Reserved
•
Bytes 3 à 4 : maximum measured flow on channel A within the last 24 hours.= 0x310A so 12,554 pulses per hour.
•
Bytes 5 to 6 : maximum measured flow on channel B within the last 24 hours.= 0x12C4 so 4,804 pulses per hour..
•
Bytes 7 to 8 : minimum measured flow on channel A within the last 24 hours.= 0x0010 so 16 pulses per hour..
•
Bytes 9 to 10 : minimum measured flow on channel B within the last 24 hours. = 0x0000 so 0 pulse per hour..
As a reminder, the alarms are automatically deactivated after the daily frame is sent.
2
3 - 4
Max flow - chan-
Alarms
nel A
0x19
0x310A
5 - 6
7 - 8
PAYLOAD
Max flow - chan-
Min flow - chan-
nel B
nel A
0x12C4
0x0010
9 - 10
FR
Min flow -
channel B
0x0000
EN
11 of 12