HIKOKI G 12SA3 취급 지침 매뉴얼 - 페이지 7

{카테고리_이름} HIKOKI G 12SA3에 대한 취급 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKOKI G 12SA3 12 페이지.

페이지 인쇄

Wear limit

6mm

17mm

4. Replacing carbon brushes (Fig. 5)

(1) Loosen the D4 tapping screw retaining the tail cover and

remove the tail cover.

(2) Use the auxiliary hexagonal wrench or small screwdriver

to pull up the edge of the spring that is holding down the

carbon brush. Remove the edge of the spring toward the

outside of the brush holder.

(3) Remove the end of the pig-tail on the carbon brush from

the terminal section of brush holder and then remove the

carbon brush form the brush holder.

(1) Insert the end of the pig-tail of the carbon brush in the

terminal section of brush holder.

(2) Insert the carbon brush in the brush holder.

(3) Use the auxiliary hexagonal wrench or small screwdriver

to return the edge of the spring to the head of the carbon

brush.

(4) Mount the tail cover and tighten the D4 tapping screw.

Carbon brush

5. Replacing supply cord

If the replacement of the supply cord is necessary, this

has to be done by the manufacturer of this agent in order

to avoid a safety hazard.

6. Maintenance of the motor

The motor unit winding is the very "heart" of the power

tool. Exercise due care to ensure the winding does not

become damaged and/or wet with oil or water.

7. Service parts list

A: Item No.

B: Code No.

C: No. Used

D: Remarks

CAUTION

Repair, modiﬁ cation and inspection of HiKOKI Power

Tools must be carried out by an HiKOKI Authorized

Service Center.

This Parts List will be helpful if presented with the tool to

the HiKOKI Authorized Service Center when requesting

repair or other maintenance.

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

No. of carbon brush

Fig. 4

Spring

Brush holder

Fig. 5

MODIFICATIONS

HiKOKI Power Tools are constantly being improved

and modiﬁ ed to incorporate the latest technological

advancements.

Accordingly, some parts (i.e. code numbers and/or

design) may be changed without prior notice.

NOTE

Due to HiKOKI's continuing program of research and

development, the speciﬁ cations herein are subject to

change without prior notice.

English