Gamber Johnson 7160-0248-01-P 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Gamber Johnson 7160-0248-01-P에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamber Johnson 7160-0248-01-P 6 페이지. Panasonic cfh2 vehicle docking station

페이지 인쇄

Installation Recommendations

Conduct a "Bench Test"

Gamber-Johnson strongly advises a "bench test" be conducted to verify that all electronic

and software issues are resolved prior to installation:

1. Make sure computer is operational by itself.

2. Insert computer into docking station and verify that the display is operating in the

dock.

3. Interconnect entire assembly and verify start-up of all components, including other

equipment (printers, modems, scanners, etc.).

Attaching Strain Relief Bracket

A cable Strain Relief Bracket is provided in the hardware bag. This bracket will

provide a mounting platform to secure all interface cables.

1. Lay docking station on its front face to expose rear mounting

surface

2. Align the Strain Relief Bracket mounting holes with the two

holes in the metal housing on the bottom of the docking

station (FIG C).

3. Using a #2 Phillips Srew Driver secure the Strain Relief

Bracket using the two #8-32 X.25 Screws provided in the

hardware bag.

FIG. C

#8-32unc x .25 Mounting Screws

Metal Housing

Strain Relief

Bracket

3 of 6