Gamber Johnson 7160-0272 설치 지침

{카테고리_이름} Gamber Johnson 7160-0272에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Gamber Johnson 7160-0272 2 페이지. Universal display mount

페이지 인쇄

INSTALLATION INSTRUCTIONS

Product

7160-0272, 7160-0273

Universal Display Mount

The Universal Display Mount attaches directly to a Center Upper Pole or other mounting

equipment containing a Gamber-Johnson swivel pattern cutout. It can also mount to an

In-Dash bracket (optional). It will provide swivel, tilt and height adjustment to a variety

of display solutions. Optional keyboard trays provides lockable stowage for keyboards.

With optional adapter plates the Universal Display Mount accepts:

- 75mm Vesa

- 100mm Vesa

- Gamber Johnson 4.09"X2.00" Accessories

- Motorola MW800/MW810

- Panasonic PDRC

- Panasonic CF-19 on Gamber-Johnson dock

Installation:

1. For installation on an In-Dash bracket, please refere to the installation instructions

provided with the In-Dash kit.

2. To mount, place one Nylon Bearing (Item 3) on the mounting surface (DS-Upper, Center

Upper, MCS, etc.).

3. Set the Universal Display Mount (Item 1) on top of Nylon Bearing (Item 3) and insert

three (3) .25-20 X 1.00 Carriage Bolts (Item 2) thru square holes in the mount, the Nylon

Bearing and the mounting surface.

4. On the underside of the mounting surface, install the other Nylon Bearing (Item 3), then

the Backup Plate (Item 4).

(Note: For proper swivel motion ensure parts are installed in the correct order,

preventing metal to metal contact.

5. Install the three .25 Flat Washers (Item 5) and .25-20 Lock Nuts (Item 6).

6. Tighten the Lock Nuts (Item 6) as required to a djust the amount of resistance in the swivel

motion.

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal in jury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Revision

Rev. B

Printing Spec: PS-001

Form

INST-492

1/2