Jadever JWL-6K 매뉴얼 - 페이지 7

{카테고리_이름} Jadever JWL-6K에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Jadever JWL-6K 20 페이지.
Jadever JWL-6K에 대해서도 마찬가지입니다: 매뉴얼 (20 페이지)

페이지 인쇄
Jadever JWL-6K 매뉴얼
M-/SET
3. Press
/MR
4. Press
or
M+/SAVE
5. Press
ZERO/ESC
6. Press

5-2 Description of Parameter Values

1. P00:
Offset value
Displays the offset value and the keypad testing can be conducted
2. P01:
Backlight mode
Off ：No backlight
Auto ： when weight value is stable or any key is pressed. But auto off after N seconds (N=2s, 5s,
10s, 20s, ever) with no action
It is always on when the weights over 9e
Ever=
On： Backlight on
3. P02:
Auto-off
Off：Non power off
5 ， 10 ， 30 ， 60(minutes): Auto power off after keeping the scale unused for 5 ， 10 ， 30 ， 60(minutes)
with "------" appears
4. P03:
Unit setting
Init : Press key
final .(final=keep the final being used unit when power off )
Use: Press key
5. P04:
Zero range
d0, d1, d2, d3, d4 and d5. (d= scale division)
6. P05:
Hold function
HoLd – 0： no hold function
HoLd – 1：Peak hold. Press
the value.
HoLd – 2： Hold after stable. Press any key to release
HoLd – 3： Hold after stable. Release after moving away the article. The hold value is based
on the current value and its range could be set in sub menu. Accumulation hold function is
to enter the parameter setting.
TARE/
to shift between the function parameters
to save and return.
to exit without saving.
Unit
to select the default unit when powering on the scale: pcs, 斤, lboz, g, kg,
Unit
to select the weighing unit. on： Enable the unit off： Disable the unit
M-/SET
(II)
key to release, and press
JWL
+/PRINT/HI key to
print out
6