Gree Multi+ Ultra MULTIU42HP230V1DO 설치 및 사용 설명서 - 페이지 10
{카테고리_이름} Gree Multi+ Ultra MULTIU42HP230V1DO에 대한 설치 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gree Multi+ Ultra MULTIU42HP230V1DO 16 페이지. Split type wall-mounted air conditioner
페이지 인쇄ELECTRICAL CONNECTIONS
MULTIU24HP230V1DO
1. Remove the handle at the right side plate of the
outdoor unit (one screw).
2. Remove the wire clamp, connect the power
connection wire to the appropriate terminal and
secure the connection. The wiring connections
must be consistent with the indoor unit terminal
connections. Wiring should match that of indoor
unit.
3. Secure power connection wire with a wire clamp.
4. Ensure all wire is securely attached.
5. Install the handle.
Provide a circuit breaker with suitable capacity,
please note the following table. Circuit
breakers will prevent short-circuits and
overload. (Caution: do not use a fuse only for
circuit protection.
Air-conditioner
MULTIU24HP230V1DO
L1 L2
Power wire
POWER
L1
L2
black
white
green
(yellow-
(brown)
(blue)
green)
L1
L2
Breaker capacity
40A
To unit A
To unit B
connecting
connecting
wire
wire
A
B
green
white
black
red
white
black
red
(yellow-
(blue)
(brown)
(blue)
(brown)
green)
INDOOR UNIT A
INDOOR UNIT B
An all-pole disconnect switch having a contact
separation of at least 3mm in all poles should be
connected to supply power wiring.
Wrong wire connections may cause malfunction of
some electric components. After fixing wire, ensure
that leads between connection to fixed point have
some space.
The connection pipes and the connection wiring of
unit A, unit B, unit C and unit D must correspond to
each other respectively.
The appliance shall be installed in accordance with
national wiring regulations.
Note: The above figures are only intended to be a simple
diagram of the appliance and may not correspond to the
appearance of the units that have been purchased.
To unit C
connecting
wire
To the power supply
C
green
green
white
black
red
(yellow-
(yellow-
(blue)
(brown)
green)
green)
INDOOR UNIT C
7
INSTALLER